Remote Release (USB)预约|Remote Release (USB)预约1.33-乖乖网

内容简介
小编推荐
相关攻略

Remote Release allows you to "remote release" your Canon EOS DSLR from your Android device with only a USB cable. *** PLEASE READ THE ENTIRE DESCRIPTION *** *** IF YOUR DEVICE IS NOT COMPATIBLE THIS IS NOT MY OR THE SOFTWARES FAULT - YOUR PHONE IS MISSING NEEDED SOFTWARE OR HARDWARE ! *** Remote releasing is using a remote control to activate the shutter of the camera. This is to prevent shaking the camera, and is often used with bulb shots and/or tripods. This app is the little (free) brother of DSLR Controller; see http://dslrcontroller.com/ and http://market.android.com/details?id=eu.chainfire.dslrcontroller Remote Release also has a discussion thread on XDA-Developers.com: http://forum.xda-developers.com/showthread.php?t=1369684 ---- Features ---- - Activate the camera's shutter button from your phone over USB, just like using a remote release cable- Enable/Disable Auto-Focus *- Support for bulb shots (hold shutter button) *- Support for continuous shooting (hold shutter button) * * Depends on camera model. Requires a DryOS based camera. See DSLR Controller's device compatibility page ( http://dslrcontroller.com/devices.php ) ---- Requirements ---- - An Android device with an ARMv7-A or newer CPU architecture (virtually all 1ghz+ devices)- Not rooted: Android 3.1 or higher with USB host kernel+API support **- Rooted: Android 2.3.1 or higher with USB host kernel support ** - Supported Canon EOS DSLR- The correct USB adapter, if applicable ** USB host kernel support can usually be determined by connecting a USB stick to your device, and seeing if the device recognizes it. ---- Devices ---- The following devices are known to be compatible: - Samsung Galaxy S2 and Note, USB host cable--- Android 2.x: root required--- Android 4.x: no root required - Motorola Xoom, USB host cable--- 3.1: unknown--- 3.2: no root - Acer Iconia A500 - Asus Transformer, keyboard dock or USB adapter - Toshiba Thrive - Samsung Galaxy Tab 8.9", 10.1", 10.1v, USB adapter--- 3.0: unknown--- 3.1: no root - Lenovo Thinkpad - B&N Nook Color--- CM 7, Nook Color Tweaks, memory limit mod, USB host cable Please see DSLR Controller's supported devices page ( http://dslrcontroller.com/devices.php ) for further device compatibility information. ----- Usage ----- -- Getting started -- - Install the application.- Connect your camera to the phone/tablet, and turn it on. Half-press the shutter button if it was already on.- If a popup comes up that offers to open Remote Release, press it, and move on to "Operation" below.- If a popup does not come up, manually start Remote Release. A Superuser popup should appear, click allow. If this took more than a few seconds, Remote Release will complain it cannot find a camera, regardless if you have one connected or not. Exit the app, half-press the shutter button on the camera, then restart the app.- If a popup appears that tells you your device is not compatible, this is the end of the line for you. -- Operation -- After you have connected your camera and started the app, the app will show you the following: - Camera model- Current shutter setting (depending on camera mode)- Current aperture setting (depending on camera mode)- Current ISO setting (depending on camera mode)- Current drive mode setting Below that you will see three buttons: - Auto-Focus button- Shutter button- Button to open DSLR Controller in the Market If your lens is set to Auto-Focus and you are using a DryOS based camera, you can use the Auto-Focus button to select if focusing is triggered by pressing the shutter button. By default it is, but it is not always desired. If your lens is set to Manual-Focus, this setting has no effect. Pressing the shutter button will take a picture on your camera. If the camera is set to bulb mode or to continuous shooting, press-and-hold the shutter button - the bulb/continuous capture will stop once you remove your finger from the screen.
【基本信息】